CHRISTINE GARNER

 Real Estate Glossary

Real Estate Glossary
Our glossary is the largest dictionary of real estate and construction terms on the Internet with almost 10,000 definitions.



 
Ha - Har - He - Hed - Hi - Ho - Hoo - Hu


Gap between two parcels of land, which is not included in the legal description of either parcel.

Tool which grips the outside diameter of the pipe or conduit and also has an integral curved shoes shaping the inside radius of the bend that is being made to a pipe or conduit.

Ambiguous contractual language that may result in an unsuspecting buyer of real estate incurring obligations or risks, not clearly evident.

Appearing on a construction drawing as dashes, they depict a feature that is invisible because it is in a piece that is out of the visibility of the viewer.

Non-waterproof glue, which comes in flake form to be heated or in liquid form for other uses. Made from animal hides, it is very strong even when used with joints that are not well fitted.

Coverage quality of paint or other wall covering.

Metal support, which stops the concrete that is being poured and cured from pushing the horizontal reinforcing steel to the bottom.

The concentration of housing units on a specific property or in a specific area.

Quick setting portland cement, which is used when immediate strength of concrete is needed.

Use of force to join pieces together after using resistance heating with high frequency AC (10 to 500 kHz). Electrical resistant heating occurs when an electrical current passes through a conductor with high resistance to the flow of current, which converts the electrical energy into heat.

Flaw made during installation of wallboard where the joint is raised higher than the rest of the surface.

Masonry wall installed to the top of one story with the grouting being pumped in to fill any voids in one continuous process to the height of the full story.

A building usually taller than six stories, serviced by elevators. The designation as to high-rise is determine by local codes.

Bolts constructed of a high tensile strength steel alloy. High Tension High voltage electricity.

The highest recorded level of water in any body of water.

Nineteenth century style house with three different kinds of window arches, the primary distinguishing characteristic of this style. The arches are straight-sided, flat-topped and rectangular.

Appraisal term meaning the legally and physically possible use that will produce the greatest current value.

A main road or thoroughfare.

The construction of a highway right of way over a privately held parcel of land. Property owners are compensated for the value of the property usurped by a highway easement.

General term for a pivoting fastener, which attaches a door to a frame or molding, providing support and allowing it to be opened and closed. Several types of hinges are thrust pivot, full and half mortise and full and half surface. A line up of major hinge types would be the butt, butterfly, double acting, Euro, H & H, Pivot, Self-closing and Soss.

Pivoting fastened with two rectangular leaves with screw holes joined by a pin or rod, to alternating barrel sections.

Cabinet door hinge, often in brass, that resembles the wings of a butterfly and are used on flush doors. A variation does exist to be used on lipped doors.

Pivoting fastener, which is invisible when the door it supports, is closed.

Hinge that has two leaves and knuckles and, because it is able to turn both ways and fold flat for storage, it is often used on shutters and screens.

This heavy hook-like hinge is easily installed with a special bit and jig.

Designed to be used with overlay or flush doors and to be completely hidden when installed, this cabinet door hinge has bent over leaves pinned together at the top.

Useful on all cabinet doors, it has two straight rectangular leaves with a nylon insert and comes in various platings.

Used on flush cabinet doors that are at least 4" thick, this strong hinge that is completely hidden when closed is usually brass-plated and available in five or six sizes.

The external angle formed by the meeting of two sloping sides of a roof.

Hip roof rafters that extend diagonally from the corner of the plate to the ridge.

Beveling of the top edge of a hip rafter to the slopes of an adjoining section of roof, with the top of the hip rafter being cut at an angle along its length and sloping down from a centerline on its top edge. Angled slopes match the slopes of the adjoining sections of roof.

Style of roof that slopes on the ends as well as the sides, so that the eave line formed is constant on all walls.

Area designated by government to have historical importance. Various incentives, including tax breaks to rehabilitate and preserve the area are provided.

Home or building which is listed in the National Register of Historic Places and certified as historic by the U.S. Secretary of the Interior. Building that is officially recognized for its historic significance has special status under the 1997 Tax Reform Act, which encourages rehabilitation and discourages demolition or substantial alteration of the structure.

A movement begun in the 1960's in the United States to protect landmarks and to unify neighborhoods. To physically rehabilitate a historic building.

Return to Top

Our glossary is the largest dictionary of real estate and construction terms on the Internet with almost 10,000 definitions.

CHRISTINE GARNER
Residential Sales and Marketing Specialist
Weichert, REALTORS
121 N. PITT STREET
ALEXANDRIA, VA 22314
Office: (703)888-5111
Fax: (703)549-0368
Toll Free: 1(800)286-7647 ext: 5111
Cell: (703)587-4855
Direct: (703)587-4855